|
DID-200 "brick"
 The
EXACOM model DID-200 series "Brick" (DID Analog
trunk interface module) uses "state of the art"
telecommunication and semiconductor technology to permit the
interface of Direct Inward Dial (DID) analog trunks with most
voice and FAX call processing systems. The DID-200 Series
is designed to work in areas where the serving telephone company
offers DID lines.
The DID-200 Series/Brick translates one DID analog trunk
per unit to several special configurations of loop trunk interfaces
which are compatible with most types of single or multi-port
voice call processing systems, PBX and Key telephone systems,
and FAX call processing systems. The DID-200 Series/Brick
may be configured on a per line basis to interface with either
immediate cut-thru or wink start DID trunks, using rotary
pulse or DTMF signaling.
The DID-200 Brick Series supports one DID trunk interface.
The "Brick" version of the DID-200 Series is a self-contained
microprocessor based telecommunications interface device which
includes a -48vdc DID-200 trunk power supply, 20hz ring generator,
ringback tone generator and a telephone line interface. It
is powered by a wall plug-in type power supply.
The DID-200 Brick Series can be interfaced with any call
processing system capable of detecting ringing, loop current
and providing on/off hook control. The DID-200 Brick Series
provides the necessary interface to automate the directing
and processing of DID calls for applications such as Voice
mail, Fax mail, TAS systems, Inbound fax routing, and paging
dispatch.
DID-200SF/Brick (store/forward)
- 1-port DID loop/station interface w/ring generator, ringback
tone generator and digit store/forward
- Supports immediate or wink start DID trunks
- Supports rotary pulse or DTMF signaling
- Converts rotary pulse DID to DTMF
- Selectable loop feed or ring down operation
DID-200SFT/Brick (store/forward w/transfer port)
- 1-port DID loop/station interface w/ring generator, ringback
tone generator and digit store/forward plus outdial port
for DID transfer or revertive calling.
- Supports immediate or wink start DID trunks
- Supports rotary pulse or DTMF signaling
- Supports outbound faxing via the Transfer/Outdial Port
- Converts rotary pulse DID to DTMF
- Selectable loop feed or ring down operation
FOR PRICING: CALL 603.228.0706
|
